Ronix GmbH — علامة مسجّلة في ألمانيا عدد رونكس الأصلية بضمان الوكيل في العراق.
التصنيفات
الرئيسية
عدد كهربائية
عدد يدوية
أدوات القياس
ملحقات الأدوات
معدات السلامة
تخزين الأدوات والمعدات
كشافات عمل
معدات الرفع
جكات السيارات
أدلّة الاختيار أصبح شريكاً المفضلة من نحن اتصل بنا تتبّع طلبك
Ronix GmbH — علامة مسجّلة في ألمانيا

منشار ديسك 1800 واط

يُعرف في السوق بـ كتر سلايدمنشار زاويةكتر المنيوم

الكود: 5102 الماركة: Ronix التصنيف: كتر سلايد (منشار زاوية)

منشار ديسك 1800 واط من رونكس، كود 5102، ضمن قسم كتر سلايد (منشار زاوية). يُعرف في السوق باسم كتر سلايد أو منشار زاوية أو كتر المنيوم. أهم المواصفات: التردد: 50-60Hz، أقصى ارتفاع قطع عند 90°: 68mm، Saw Blade: 255mm*254mm*100T، أقصى ارتفاع قطع عند 45°: 39mm. متوفّر في العراق بالتوصيل إلى كل المحافظات والدفع عند الاستلام.

وصف الشركة المصنّعة (بالإنجليزية):

As a DIYer or professional specialist, there are pre-determined criteria to consider before choosing a miter saw. These include motor power, blade, no-load speed, and table.
The higher the power, the better the performance. It then allows you to work without putting in enough effort. The Ronix 5102 compound miter saw has a power of 1800W. The type of blade depends closely on the material to be worked on. Thus, it will be different if the workpiece is made of wood, PVC, or non-ferrous metals. In addition, the number of teeth on the blade has a direct influence on the finish of the cut. On average, a blade has between 40 and 60 teeth. In addition to the number of teeth, the speed of the blade also affects the finish of the blade. Ronix has 5000 revolutions per minute which allow the 255mm cutting disc to move. The Ronix 5102 miter saw is mounted on a cast aluminum table.
المواصفات — منشار ديسك 1800 واط
التردد 50-60Hz
الموديل 5102 5102
أقصى ارتفاع قطع عند 90° 68mm
Saw Blade 255mm*254mm*100T
أقصى ارتفاع قطع عند 45° 39mm
القدرة 1800W
الفولتية 220-240V
السرعة بدون حمل 5000RPM
السرعة بدون حمل (RPM) 3800 RPM
أقصى ارتفاع قطع عند 90° 68mm
Max Cutting Speed at 0°/90° 66*144 mm
قطر حجر القطع 255mm
أقصى ارتفاع قطع عند 45° 39mm
Max Cutting Speed at 45°/90° 66*88 mm
Max Cutting Speed at 0°/45° 39*144 mm
Max Cutting Speed at 45°/45° 39*88 mm
الوزن 14kg
الوزن 13.8Kg
الملحقات Spanner, Dust bag, Circular saw blade 255mm, 2 side holder, Workpiece clamp
الملحقات Wrench,Carbon brush,extend bar.
تواصل على واتساب